Mono / Polycrystalline Modules

SP Desert Watt

SP Desert Watt solar modules comes with two variants SP 260 “DESERT” Polycrystalline Module and SP 270 “DESERT” Monocrystalline Module. These modules are made for extreme weather conditions and hence name as “DESERT” modules. The most advantageous fact about these modules are it can be used in regions where other panels simply will not work.

Normal PV panels have a temperature coefficient of about -0.45%/per calorie whereas the DESERT panel’s optimized cells increase this coefficient by roughly 15%, which leads to improved power generation. For every degree of heat, the power benefit of using this module will also increase.

These DESERT Panels can withstand temperatures up to 125°C.

SP 260 “DESERT“ Polycrystalline

  • 60 cells
  • Optimum power yield /area efficiency
  • Good price / performance ratio
  • Optimized for areas with high temperature
  • Long life in areas where other panels fail
  • With HPTP technology

SP Desert ++ Module Highlights

  • Maximum (sustained) Temperature: 125° C.
  • 100 % PID free
  • Proven quality of products and manufacturing facilities (German Standards)
  • Maximum energy yield and high annual power output
  • Products made in EU
Dimensions : (L) 1640 mm x (B) 990 mm x (T) 35 mm
Weight : 20.5 Kilograms
Number of cells : 60
Cell size : 156 mm x 156 mm
Cell material : Polykristalline SI
Front cover : Solar Glass
Backside cover : polymer
Frame material : aluminum
Cable length : 500 mm
Connector type : MC4 pluggable
Bypass Diodes : 3

SP 270 “DESERT“ Monocrystalline

Normal PV panels have a temperature coefficient of about -0.45%/per calorie whereas the DESERT panel’s optimized cells increase this coefficient by roughly 15%, which leads to improved power generation. For every degree of heat, the power benefit of using this module will also increase.

These DESERT Panels can withstand temperatures up to 125°C.

  • 60 cells
  • Optimum power yield /area efficiency
  • Good price / performance ratio
  • Optimized for areas with high temperature
  • Long life in areas where other panels fail
  • With HPTP technology

Highlights of SP 270 “DESERT“ Monocrystalline

  • Maximum (sustained) Temperature: 125° C.
  • 100 % PID free
  • Proven quality of products and manufacturing facilities (German standards)
  • Maximum energy yield and high annual power output
  • Products made in EU
Dimensions : (L) 1640 mm x (B) 990 mm x (T) 35 mm
Weight : 20.5 Kilograms
Number of cells : 60
Cell size : 156 mm x 156 mm
Cell material : Monocrystalline SI
Front cover : Solar Glass
Backside cover : polymer
Frame material : aluminum
Cable length : 500 mm
Connector type : MC4 pluggable
Bypass Diodes : 3

Manufactured and tested according to IEC standard 61215 and DIN 61730. TÜV-Nord certified. Climate neutral prepared.

Accuracy Pmpp 3%

Accuracy of other electrical data 10%

Temperature coefficient Percent Absolute
Pmpp -0,38 %/K -1,002 W/K
Vmpp -0,32 %/K -0,121 V/K
Impp -0,001 %/K -0,001 A/K
Voc -0,318 %/K -0,118 V/K
Isc 0,077 %/K -0,006 A/K
Load
Mechanically 5,400 Pa
Reverse Current IR 15A
Electric Data SP 270 “DESERT “ MONO
Rate Output Pmpp 270W
Rated Output Impp 8.81 A
Rated Voltage Umpp 30.9 V
Short Circuit Current Isc 9.44 A
Open Circuit Voltage Uoc 39.2 V
Efficiency 16.6%
Sorting +4.99 / 0W
Maximum Voltag 1000 V